Archive for December, 2010

Battery Cabinets


A2 battery cabinet A2 Battery cabinet (2 x 100Ah batteries)

Height – 335mm
Width – 412mm
Depth – 428mm

Unit comes assembled
A4 Battery cabinet A4 Battery cabinet (4 x 100Ah batteries)

Height – 625mm
Width – 412mm
Depth – 428mm

Unit comes in seperate pieces, unit must be assembled on site.
A8 Battery cabinet A8 Battery cabinet (8 x 100Ah Batteries)

Height – 625mm
Width – 806mm
Depth – 428mm
Unit comes in seperate pieces, unit must be assembled on site.
A12 battery cabinet A12 Battery cabinet (12 x 100Ah batteries)

Height – 930mm
Width – 806mm
Depth – 428mm
Unit comes assembled.
Hotswop.jpg A20 Battery cabinet (20 x 100Ah batteries)

Height – 1615mm
Width – 775mm
Depth – 465mm
Unit comes assembled.
A35 battery cabinet A35 Battery cabinet (35 x 100Ah batteries)

Height – 1615mm
Width – 1400mm
Depth – 428mm
Unit comes assembled.

Servo Voltage Stabiliser

Servo type 1/1 voltage stabilizers AVR (500VA – 30kVA)

Servo type 3/3 voltage stabilizers AVR (1.5kVA – 100kVA)

  • Microprocessor DSP Control
  • Automatic power voltage regulator
  • Protection against brownouts and overvoltage
  • Short circuit and overload protection
  • Digital indicators
  • Surge spike and lighting protection

Electronic Voltage Stabiliser


We have developed a leading range of power voltage stabilizers and power voltage regulator units, we offer single and three phase servo type voltage stabilizers and three phase electronic type power voltage stabilizers with isolation. We also have a range of power voltage stabilizers designed for out doors, useful for isolated installation or when space is limited.

Electronic type voltage stabilizers

  • Optional isolation transformer
  • No moving parts
  • Optional out door enclosure / Fast reaction times

Black Box Surge and Power Conditioner

The POWER CONDITIONER and FILTERPLUG combines both surge / transient suppression and EMI / RFI filtration. These high performance devices are designed for the protection of sensitive electronic / electrical equipment against transients transmitted via the mains lines. The units are available in configurations of one to five standard sockets or Powerite sockets (coded). As an option the unit may be ordered with graded filtration where two or more sockets are required. Guarded filtration will inhibit any feed back noise generated by equipment plugged into the BLACK BOX. e.g. Laser printers.

100 Base T Surge Suppression unit

The 100 Base T data transient suppression units are designed to handle speeds in excess of 100 Mbps fully duplexed. They have an insertion loss of less than 0.5dB. Interconnection is made by means of RJ45 Cat. 5 sockets. The units are available in 19” 1U rack mount panels (24 port) or as a stand alone unit (single port) in an 8 wire configuration.

12345»